Eneo PXB-2080MIR B, Quick Installation Manual

Page: 14 / 139

Operating Instructions
14
FULL-HD NETWORK CAMERA
Quick Network Setup
After camera is connected with IP, its control is available via WEB Viewer.
To access the ADMIN on IP INSTALLER
ID: root
PW: root
The network camera‘s default IP address is: 192.168.1.10.
Therefore, to access the camera for the first time, set the PC‘s address as shown below.
192.168.1.XX; for example:
IP Address: 192.168.1.20
Subnet Mask: 255.255.255.0
• Enter the camera’s IP address in the URL bar of the Web browser window and hit
“Enter.”
• Enter the default user name (root) and password (root) in the prompt request dialogue.
It is also possible to reset IP parameters to the original factory default settings by
pressing the IP reset
• If the Information message doesn‘t come out due to the problems like network failure,
you can start the manual installation.
• Click the Install ActiveX Control, and the pop-up window will be displayed. After the
installation is successfully completed, Smart Viewer window will be displayed.
NOTICE