Eneo PM-42A Installation Manual Download Page 2

Page: 2 / 2

INSTALLATION

REFERENCE of MOUNTING HOLES

1. Feed the straps through the vertical slits located on the four corner of the mount adapter.

2. Wrap the straps around the pole then use the driver to rotate the screw that is attached at the ends of

the straps. Rotating the screw shorten the straps thereby fastening the mount around the pole.

3. Attach the cameras* to the pole mount adapter predetermined their mounting holes.

(*) Using the supplied screws with the camera packing you wish to mount.

Refer to the camera instruction manual for their mounting process.

eneo® is a registered trademark of

VIDEOR E. Hartig GmbH

Exclusive distribution through

specialised trade channels only.

VIDEOR E. Hartig GmbH,

Carl-Zeiss-Straße 8,

63322 Rödermark/Germany

Tel. +49 (0) 6074 / 888-0

Technical changes reserved

Version 09/2017

Summary of Contents for PM-42A

Page 1: ...ructure make sure that all the screw parts are metallic Follow the mounting instructions based on the assigned marks to the camera or mounting accessory in the Reference Section below Straps Mounting...

Page 2: ...nt around the pole 3 Attach the cameras to the pole mount adapter predetermined their mounting holes Using the supplied screws with the camera packing you wish to mount Refer to the camera instruction...