38
– Detection Rule:
User can assign up to 3 different rules for each preset position.
·
Line Detector
Once selected, a
red
line appears on the video preview window. Drag and
drop the line at the desired position. User can change the length and the
slope by dragging each end of the line.
·
Rule Name:
User can type in the rule name.
·
Direction:
This detector can detect line crossing events and also count up
number of the event; the direction of the event appears as a solid triangle
shape at the center of the line.
·
Base:
The reference point of the object detection.
·
Counter:
User can choose between Counter and Detector.
·
Field Detector
Once selected, a
blue
line appears on the video preview window. Drag and
drop the box at the desired position. User can change the shape of the box
by dragging each corner to any shape of a quadrilateral.
·
Rule Name:
User can type in the rule name.
·
Base:
The reference point of the object detection.
·
Mode:
Currently Enter rule only.
– Exclusive Area
User can set up to 4 areas where the rules are not applied. Once selected, a
purple
line appears on the video preview window. Drag and drop the box at the
desired position. User can change the shape of the box by dragging each corner
to any form of a quadrilateral.
NOTE:
Video Content Analysis function cannot be used in conjunction with Motion Detection
function. If you choose
Enable video content analysis,
motion detection function
is automatically turned off.
When the settings are complete, click
Save
button to save the settings, or click
Reset
button
to clear all of the information you entered without saving it.
