7
EN
Operating instructions
Power Supply connections
Using OSD controller
Camera can work with either 24VAC or 12VDC, dual voltage power. Primary and
secondary grounds are completely isolated to avoid the possible ground-loop
problems.
Setup menu can be accessed and controlled by OSD control joystick on the rear
of the camera unit. Five commands are available with the joystick.
i
i
HD-SDI or EX-SDI is selectable by Video format switch only.
TVI mode or AHD mode is selectable in the menu only. (SYSTEM> ANALOG MODE)
1. SET (
●
) : Access to the menu or enter the setting. To enter the main menu,
press the Set Key down.
2. UP/DOWN (
▲
/
▼
) : Choose the desired sub-menu and to move the cursor up
or down.
3. LEFT/RIGHT (
◄
/
►
) : Set up the value of the selected menu. Used to adjust the
desired menu selection and to move the cursor left or right.
Description of the OSD control operation
4. ‘ ’ denotes the long press down straightly for about 2 seconds
Description of the Motorized ZOOM&FOCUS adjustment
1.
▲
: Zoom In
2.
▼
: Zoom Out
3.
◄
: Focus Near
4.
►
: Focus Far
Works only when OSD Menu is inactive.
HD-SDI
EX-SDI
CONTROL
HD-ANALOG
POWER
OSD Control Joy Stick
Video format Switch
