Eneo MEM-44F0025M0A, User Manual

Page: 18 / 25

- 18 -
◆ GAMMA [0.45 ~ 0.75] : Changes the gamma curve of the camera.
◆ MIRROR [ON, OFF] : Mirrors the image horizontally on the screen.
◆ FLIP [ON, OFF] : Flips the image vertically on the screen.
◆ D-ZOOM: You can use the digital zoom with x1~x16 magnifications.
◆ ACE [OFF/LOW/MIDDLE/HIGH] : Intelligent lighting level control to over come even strong backlight
conditions.
◆ DEFOG [ON, OFF] : This fuction helps to recognize the object in a dusty weather condition.
ON, a submenu appears where you can make finer adjustments.
◆ SHADING [ON, OFF] : Compensates the shading effects of lenses when the lens is set to a very
wide angle. This function will reduce the brightness difference between the centre and the
edges. If you select ON, a submenu appears where you can make finer adjustments.
◆ PRIVACY [ON, OFF] : This is used to hide certain areas on the monitor. You can designate each different
15 area. The size of a designated area can be adjusted. The color of a privacy area can be selected
various colors. When you select the return, the setting values in this function menu are saved, then get
out of this menu.
* BOX
ZONE NUM [0~15] : Select a mask out of the 16 mask areas and set the options below for the
selected mask.
ZONE DISP [ON, OFF] : Choose ON to activate privacy masks and press OFF to deactivate masks.
H-POS [0~80] : Define the horizontal start position of the privacy mask.
V-POS [0~46] : Define the vertical start position of the privacy mask.
H-SIZE [0~80] : Define the horizontal size of the privacy mask.
V-SIZE [0~46] : Define the vertical size of the privacy mask.
Y LEVEL [0~20] : Define the brightness of the mask color.
CB LEVEL [0~20] : Define the blue amount of the mask color.
CR LEVEL [0~20] : Define the red amount of the mask color.
TRANS [0~3] : Applies a tone from the window to act on the selected area.
* POLYGON
ZONE NUM [0~7] : Select a mask out of the 16 mask areas and set the options below for the
selected mask.
ZONE DISP [ON, OFF] : Choose ON to activate privacy masks and press OFF to deactivate masks.
POS0-X : You can select the horizontal & Diagonal starting position of the monitoring area.
POS0-Y : You can select the vertical & Diagonal starting position of the monitoring area.
POS1-X : You can select the horizontal & Diagonal starting position of the monitoring area.
POS1-Y : You can select the vertical & Diagonal starting position of the monitoring area.
POS2-X : You can select the horizontal & Diagonal starting position of the monitoring area.
POS2-Y : You can select the vertical & Diagonal starting position of the monitoring area.
POS3-X : You can select the horizontal & Diagonal starting position of the monitoring area.
POS3-Y : You can select the vertical & Diagonal starting position of the monitoring area.