10
2. Press and hold the Reset button with a straightened paperclip while reconnecting
the power.
3. Keep the Reset button pressed until the Status indicator blinks.
4. Release the Reset button.
5. When the Power Indicator changes to Green (may take up to 40 seconds), the
process is complete and the encoder has been reset.
6. The encoder resets to factory default and restarts after completing the factory
reset.
CAUTION:
When performing a Factory Reset, you will lose any settings that have been
saved. (Default IP 192.168.1.10)
Further information
Make sure to always upgrade to the latest firmware version available from the eneo web-
site at www.eneo-security.com to receive the latest functionality for your product.
The manual, and other software tools are available on the eneo website at www.eneo-se-
curity.com or on the included CD.
Information on compatible video management software solutions can be found in the
category
Videomanagement
at www.eneo-security.com.
Open Source Software
The software included in this product contains copyrighted software that is licensed
under open source licenses.
You may obtain the complete corresponding source code from eneo for a period of three
years after the last shipment of this product by sending email to: opensource@eneo-se-
curity.com.
If you want to obtain the complete corresponding source code with a physical medium
such as CD-ROM, the cost of physically performing source distribution might be charged.
For more details about Open Source Software, refer to the eneo website at www.eneo-se-
curity.com or an included product CD.
Summary of Contents for MAM-5ME1001MTA
Page 11: ...11 EN ...