Eneo KBD-2USB, User Manual

Page: 18 / 51

Change Administrator Password
This screen allows you to change administrator password.
Enter 4 digits password and press ENTER . Factory Default setting is 9999.
NOTE: Factory default Administrator’s password is 9 9 9 9 + ENTR .
User password is 1 1 1 1 + ENTR
If you forgot your own password, contact service personnel or distributor.
3.2 Network
1. Baud Rate Enters the Baud Rate setup submenu.
2. Com Ports Enters the Communications Ports setup submenu.
3. USB USB Mode Enable/Disable
4. MUX Config Set the multiplexer configuration.
5. Set Slave KBD Select to use the slave keyboard or not.
Save and exit Save the changed settings and return to the previous menu
Baud Rate
Com Ports
PORT Baud Rate Configuration
DOME1 2400~38400 None/Dome/DVR5
DOME2 2400~38400 None/Dome/DVR1-5/PC-DVR/ KBDDUP/KBDTRI/AUX IN
RS232 2400~38400 None/DVR1-5/PC-DVR/AUX IN
KBDDUP: Ke Duplex Multiplexer
Current PW : XXXX
NEW PW : YYYY
Confirm PW : YYYY
Save and Exit
Baud Rate
1.Dome1 : 9600
2.Dome2 : 9600
3.RS232 : 9600
Save and Exit
Com Ports
1.Dome1 : DOME
2.Dome2 : NONE
3.RS232 : NONE
Save and Exit