34
• Image Appearance
This provides access to the advanced image settings for the network camera.
– Brightness:
The image’s brightness can be adjusted in the range 1 ~ 10, where a higher
value produces a brighter image.
– Contrast:
Adjust the image’s contrast by raising or lowering the value in this field in the
range 1 ~ 10.
– Saturation:
Set an appropriate value in the range 1 ~ 10. Lower values mean less color
saturation.
– Hue:
Set an appropriate value in the range 1 ~ 10. The value distinguishes color, such as
red, yellow, green, or violet.
– White Balance Mode:
Select white balance mode which fits camera installation
environment. In case of Manual mode, user can set R, G, B gain manually.
• Enhance Control
– Enable wide dynamic range:
Activates WDR which cannot be used with Defog function.
If WDR is activated, shutter mode becomes automatic mode only.
– Enable flip horizontal:
Check this box to flip the image.
– Enable noise reduction:
Check this box to activate the noise reduction.
Once enabled, you can select noise reduction level.
– Enable defog:
Check this box to activate the defog function.
– Metering Mode:
Users can change the metering mode.
This is method of measuring the intensity of the light hitting and reflected by a subject in
order to determine the exposure required.
