Eneo IPD-72A2712M5A, User Manual

Page: 42 / 71

43
MEGA-PIXEL NETWORK CAMERA
Full Menu Setup
To set the motion detection area (up to 4 include-types and 4 exclude-types) :
1) Mark ENABLE checkbox.
2) In the video window, place the mouse cursor where you would like to make a detection
window and click&drag the right button. The following window is then generated.
• INCLUDE-Type : defines areas where motion should be detected.
• EXCLUDE-Type : defines areas within a window that should be ignored.
3) Enter a name and then click SAVE.
> Mark ENABLE checkbox to input the alarm signal from the alarm-in port.
> TYPE : Lets the camera know the type of alarm contacts, NO=Normally Open &
NC=Normally Close.
> DWELL TIME : Sets the time for the alarm once detected by the alarm-in.
●
Alarm In
Used to trigger the event when the camera gets rebooted.
> Mark ENABLE checkbox to activate the system event.
> DWELL TIME : Sets the time for the alarm once the system event is detected.
●
System