Safety instructions
General safety instructions
• Before switching on and operating the system, first read this
safety advice and the operating instructions.
• Keep the operating instructions in a safe place for later use.
• Installation, commissioning and maintenance of the system
may only be carried out by authorised individuals and in
accordance with the installation instructions - ensuring that
all applicable standards and guidelines are followed.
• Protect the devices from water penetration and humidity,
since these can cause lasting damage.
• Should moisture nevertheless enter the system, under no
circumstance switch on the devices under these conditions,
instead send them for examination to an authorised special-
ist workshop.
• The system must never be used outside of the technical
specifications, since this can destroy it.
• The device must be protected from excesses of heat, dust,
humidity and vibration.
• When separating the system from the voltage supply, only
ever use the plug to pull out the cable. Never pull directly on
the cable itself.
• Lay the connecting cables carefully and check that they are
not mechanically stressed, kinked or damaged and that no
humidity can penetrate into them.
• In the event of a malfunction, please inform your supplier.
• Maintenance and repairs may only be carried out by author-
ised specialist personnel.
• The system must be isolated from the power supply before
opening the housing.
• The device may only be opened by qualified service person-
nel. Unauthorised access invalidates any warranty claim.
• Connection cables should always be exchanged through
VIDEOR E. Hartig GmbH.
• Use only original spare parts and accessories from VIDEOR E.
Hartig GmbH.
• The housing should only be cleaned using a mild domestic
cleaning agent. Never use solvents or petrol as these can
permanently damage the surface.
• During installation, it is essential to ensure that the seals pro-
vided are correctly installed and that they are not displaced
during installation. Damaged seals must not be installed and
will invalidate any warranty.
• The installer is responsible for the maintenance of the
enclosure as per the technical data, e.g. by sealing the cable
outlets with silicone.
• Wire end ferrules should be used when shortening the
flexible connection cables.
• The devices may only be operated in the temperature
range indicated in the data sheet and within the defined air
humidity range.
Class A device note
This is a Class A device. This device can cause malfunctions
in the living area; in such an event, the operator may need to
take appropriate measures to compensate for these.
WEEE (Waste Electronical & Electronic Equipment)
Correct Disposal of This Product (Applicable in the European
Union and other European countries with separate collection
systems).
