Eneo HDD-2080MIR, Installation And Operation Manual

Page: 12 / 25

11
6.2 MAIN menu
Press
● to enter the setup menu for about 1 second.
MENU V3.07
1. EXPOSURE
2. LENS
3. FOCUS ADJ.
4. SCENE ENHANCE
5. 3D-NR
6. DAY/NIGHT
7. PICT ADJUST
8. SPECIAL
9. SYSTEM
A. EXIT
↵
DC
↵
↵
NORMAL
MID
AUTO
↵
↵
↵
↵
SAVE&EXIT
MAIN Default Descriptions
EXPOSURE
Sets EXPOSURE MODE, BRIGHTNESS, SENS-UP and AGC.
See ‘6.3 EXPOSURE’ for detail.
LENS DC Sets Lens type and See ‘6.4 LENS’ for detail.
FOCUS ADJ See ‘6.5 ZOOM/FOCUS’ for detail.
SCENE
ENHANCE
NORMAL
NORMAL – Optimized for the normal indoor and outdoor in the good
lighting condition.
WDR – Improves the visibility for the high bright area and the dark area
by the double captures of image with LONG and SHORT exposures.
With WDR ON, the frame rate becomes half by the double captures.
WDR level can be selected from LOW, MID and HIGH.
Care should be taken to select this mode because video may lose its
quality in some environments by the over compensation.
※
CVBS video signal - Even if WDR is set to ON, it shows OFF on CVBS
video. It should be considered when installer adjusts the video with
installation monitor.
D-WDR – Improves the visibility by compensating the video gain for the
dark area. Noise can increase in the dark area accordingly.
BLC – Improves the visibility for the dark object by the bright back light.
Outside area of BLC window can over saturate.
BLC has a target window for compensation and its size and position
can be set by H-POS, V-POS, H-SIZE and V-SIZE.
HLC – Cuts out the highlight area with black mask and excludes it from
compensation. Lower HLC LEVEL cut out video from the lower level.