background image

 

 

                                                      

 

To prevent fire or shock hazard, do not expose the unit to rain or moisture. 

 

        

The symbol is intended to alert the user to the presence of important          

operating and maintenance(servicing) instructions in the literature   

accompanying the unit. 

        

 

         

The symbol is intended to alert the user to the presence of   

uninsulated "dangerous voltage" within the product's enclosure that   

may be of sufficient magnitude to constitute a risk of electric shock   

to persons. 

 

 

 

 

 

 

 

 

  Warning(NTSC version) -- This equipment has been tested and found to comply with the limits for a Class 
A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable 
protection against harmful interference when the equipment is operated in a commercial environment. This 
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in 
accordance with the instruction manual, may cause harmful interference to radio communications. 
Operation of this equipment in a residential area is likely to cause harmful interference in which case the 
user will be required to correct the interference at his own expense. 

 

Caution -- Any changes or modifications in construction of this device which are not expressly approved by 
the party responsible for compliance could void the user's authority to operate the equipment. 

 

Mains power quality should be that of a typical commercial environment. If the user of the model requires 
continued operation during power mains interruptions, it is recommended that the model be powered from 
an uninterruptible power supply (UPS) or a battery.” 

Notice -- The images used in manual are processed to help comprehension and may 

differ from actual video of the camera.   

WARNING   

NEVER USE THIS CAMERA 

 

1.  IN WATER. 

2.  IN AREA WHERE HAS SHOCK OR VIBRATION WHICH RESULTS IN THE 

PROBLEM FOR AUTO FOCUSING. 

Caution 

 

To prevent electric shocks 

and risk of fire hazards, do 

NOT use other than specific 

power source. 

 

 

 

 

 

 

WARNING 

Summary of Contents for HDC-2080Z03





















Reviews: