background image

FULL-HD MEGA-PIXEL CAMERA

21

Operating Instructions

• ATWext: White balance is continuously working along with the color temperature 

  changes in the range of 1,800K~11,000K.

• ONE PUSH: White balance works only during ● is pressed.

• MANUAL: White balance is fixed to the settings by R_GAIN and B-GAIN. 

  This mode can be used only when the color temperature does not vary.

: Adjusts the sharpness of video(0~20).

7-2. SHARPNESS 

(default: 10)

: Adjusts the color level of video(0~20).

7-3. COLOR GAIN 

(default: 10)

: Adjusts the gamma of video.

7-4. GAMMA 

(default: 0.5)

7-5. SHADING 

(default: OFF) 

       ON enables to compensate the shade caused by wide lens setting.

• OFF : Normal display without mirroring or flipping

• Hor. : Video is reversed left and right

• Ver. : Video is reversed upside down

• HV : Video is reversed left and right and upside down.

  When the video is reversed by Ver. or HV, then the joystick directions are

  reversed accordingly. This feature is very useful when a camera in installed

  in upside down.

: Reverses the video left and right and/or up and down by MIRROR/FLIP.

8-1. MIRROR/FLIP 

(default: OFF)

SPECIAL

MIRROR/FLIP
PRIVACY
MOTION
PIXEL DEFECT
TITLE SET
DISPLAY
DEFOG
ZOOM MODE
RETURN

OFF
OFF
OFF
OFF

OFF
OFF
RET

8. SPECIAL

8-2. PRIVACY 

(default: OFF)

 

8-2-1. BOX : Set area to select privacy zones by square.

: Set the Privacy zones which can be enabled individually by BOX or 

  POLYGON are available to mask the video.

Summary of Contents for HDB-2080M2810IR D

































Reviews: