68
69
APPENDIX 2. - FAQ
1. How to disable the DHCP function and use a static IP instead?
A:
Turn the „DIP SWITCH” from „3” to „4” and vary the relative network settings, the IP Address, NetMask and
Gateway on the image web page.
2. Can the CF Card be removed during recording?
A:
No, it cannot be removed until the recording comes to a single point. The POWER LED flashing light signals the
CF card is operating. The green light indicates the unit is activating. The red light warns the CF card cannot be
removed. If the CF card is withdrawn in this mode, the card will break.
3. I’ve set the function of „Motion Detection” but it doesn’t seem to work.
A:
Check if „Motion range” and „Sensitivity” have been set before activating the function.
4. My AVI files recorded in the CF Card cannot be displayed. What can I do to display the files?
A:
Please visit „http://www.morgan-multimedia.com/” to download „Morgan M-JPEG codec” and install it, and then
check the selection of the „IJP Core”.
