Eneo DLR-1004/500V, Operating Instructions Manual, Page: 42 / 64

User’s Manual
34
Highlight the Storage tab and the Storage setup screen displays.
Highlight the first box beside Disk S.M.A.R.T. , and press the button. Use the Up and Down
arrow buttons to scroll through the numbers. Refer to the hard disk drive manufacturer’s
documentation for the correct temperature setting. If the temperature of hard disk drive exceeds
the defined threshold, the system triggers an alert.
Highlight the second box beside Disk S.M.A.R.T. , and press the button. Select either ºC
(Celsius) or ºF (Fahrenheit) , and press the button.
Highlight the
Actions
tab and the System Event
Actions
setup screen displays.
Highlight the Notify box beside the desired event ( System , Boot Up , Restart , Shutdown , Check
Recording
,
Disk Almost Full
,
Disk Full
,
Disk Bad
,
Disk Temperature
,
Disk S.M.A.R.T.
or
Disk Config Change ), and press the button. You can toggle the entire list On and Off by
highlighting Notification and pressing the button. You can toggle the individual items On and
Off by highlighting that item and pressing the button. Highlight
OK
and press the button
to accept your changes.
NOTE: Mail notify is the only option available for the System event.
NOTE: For the Notify action to work, the DVR should be registered in the RAS (Remote
Administration System).
Figure 39 ─ Storage setup screen.
Highlight the box beside
Disk Bad Notify
, and
press the button. Select percentage level of
bad disk sectors at which you want the DVR to
trigger an alert. Percentage levels range from
10% to 90%.
Highlight the box beside Disk Almost Full
Notify
, and press the button. Select the
percentage level of disk usage at which you
want the DVR to trigger an alert. Percentage
levels range from 80% to 99%.
Figure 40 ─ System Event Actions setup screen.
The DVR can be set to react to system events.
System events can notify a number of different
devices.