AK-23 Quick Installation Guide (EN)
Pillar Mount
Allow the Junction Box match with the Bracket (DOME-WB6) +Pillar Bracket (PM-21) to mount the
camera on one Pole.
1.
Fix the Pillar Bracket on one Pole through two Hoops to control tightness
2.
Fix the Bracket (Dome-WB6) to the Pillar bracket
3.
Route the power and BNC cable through the bracket
4.
Screw the Junction Box to the Bracket shown as below
5.
Insert the box ring to the mounting plate for waterproofing
6.
Open the dome cover by loosening screws
7.
Connect the power and BNC cable with the camera cables
8.
Assemble the vandal proof dome base to the mounting plate using the assembly screws
9.
Set the camera’s viewing angle
10.
Put the dome cover to the dome unit and tighten screws.