Eneo 232569, User Manual, Page: 34 / 63

35
MEGA-PIXEL NETWORK CAMERA
Full Menu Setup
To set the motion detection area (up to 4 include-types and 4 exclude-types) :
1) Mark ENABLE checkbox.
2) In the video window, place the mouse cursor where you would like to make a detection
window and click&drag the right button. The following window is then generated.
• INCLUDE-Type : defines areas where motion should be detected.
• EXCLUDE-Type : defines areas within a window that should be ignored.
3) Enter a name and then click SAVE.
[ NOTE ]
Motion detection and VCA cannot be used simultaneously. If either one is enabled,
the other one is disabled automatically.
The camera can detect severe changes in the image caused by actions such as
repositioning the camera or painting over of the lens and generates an alarm to alert.
> Mark ENABLE checkbox to activate the tamper alarm.
> DWELL TIME : Sets the time for the tamper alarm once detected.
●
Tamper
Used to trigger the event when the camera gets rebooted.
> Mark ENABLE checkbox to activate the system event.
> DWELL TIME : Sets the time for the alarm once the system event is detected.
●
System