Eneo 227050, User Manual

Page: 41 / 67

42
MEGA-PIXEL NETWORK CAMERA
Full Menu Setup
To set the VCA detection area (up to total 3 VCAs including Line Cross, Field intrusion &
Appear/Disappear) :
1) Mark ENABLE checkbox.
2) Click the mouse right button on the video viewer and a popup menu appears.
• CREATE VCA DETECTOR : Select to create the VCA type, up to 3 VCAs.
• CREATE MASKING AREA : Select to create the masking area which will exclude
the detection.
• DELETE VCA DETECTOR : Deletes the existing VCA window. VCAs can be deleted
at the list too.
• DELETE MASKING AREA : Deletes the existing VCA mask window.
3) Enter a name and then click SAVE.
> Mark ENABLE checkbox to create & activate up to 3 VCAs(Line Cross, Field intrusion &
Appear/Disappear)
> NAME : Input the individual name for each VCA.
[ NOTE ] Motion detection and VCA cannot be used simultaneously.
If either one is enabled, the other one is disabled automatically.
> OBJECT SETTING:
Click the green rotating icon on the top-right of the video window and OBJECT
SETTING menu will appear. To hide it, click the icon again.
Mark SHOW OBJECT SIZE checkbox and a black rectangle at the top-left corner
of the video window will appear. The black rectangle is the reference size which
shows the minimum (white box) & maximum (black box) detecting size of the object.
To adjust the minimum (or maximum) object size to be detected, adjust the left
(right) ends of the slide bars, WIDTH & HEIGHT, by moving them with clicking and
holding the left mouse button. Objects can be detected only for the object size set
between minimum and maximum, that is, an object which is smaller than minimum
or greater than maximum can’t be detected. Too small value in MINIMUM or too big
value in MAXIMUM for the object size might increase the erroneous detections.
• WIDTH : Sets the minimum/maximum sizes in width of the objects to be detected.
• HEIGHT : Sets the minimum/maximum size in height of the objects to be detected.
• SHOW OBJECT SIZE : Shows the reference size of detection object.