ULTRA CLEAR RESOLUTION CAMERA
Operating Instructions
13
OSD Control
Joystick
Video format
DIP Switch
EX-SDI↔HD-SDI
Using OSD Controller
Setup menu can be accessed and controlled by OSD control joy stick on
the side of the gimbal. Five commands are available with the joy stick.
The design of OSD could be different according to the Model.
1) SET Key (
●
) : Access to the menu or enter the setting.
To enter the main menu, press the Set Key down.
2) UP/DOWN Key (
▲/▼
) : Choose the desired sub-menu and to move the
cursor up or down.
3) LEFT/RIGHT Key (
◄/►)
: Set up the value of the selected menu. Used
to adjust the desired menu selection and to move the cursor left or right.
Description of the OSD control operation
4) ‘
’
denotes the long press down straightly for about 2 seconds
Description of the Motorized ZOOM&FOCUS* adjustment
1)
▲
: Zoom In
2)
▼ : Zoom Out
3)
◄
: Focus Near
4)
► : Focus Far
(*) Works only when OSD Menu is inactive.
Video sub-out Connector
EX-SDI
↔
HD-SDI: The default setting is EX-SDI mode.
Using Video format DIP switch
HD-SDI or EX-SDI is selectable by Video format switch only.
AHD, THD, CHD mode is selectable in the menu only.
(SYSTEM> OUTPUT> ANALOG OUTPUT)
