MPB-72MxxxxM0A
Operating Instructions
12
Setup menu can be accessed and controlled by OSD control joystick on
the side of camera unit. Five commands are available with the joy stick.
The design of OSD could be different according to the Model.
Description of the joystick operation
1) SET (●) : Access to the menu or enter the setting.
2) UP/DOWN (
▲/▼
) : Choose the desired sub-menu and to move the cursor up or down.
3) LEFT/RIGHT (
◄/►)
: Set up the value of the selected menu.
Used to adjust the desired menu selection and to move the cursor left or right.
Using OSD controller
4) ‘
’
denotes the long press down straightly for about 2 seconds
Video Sub-out
Connector
OSD Control Joy Stick
SUB-OUT
ZOOM
Cover Open
Description of the Motorized ZOOM&FOCUS* adjustment
1)
▲
: Zoom In
2)
▼ : Zoom Out
3)
◄
: Focus Near
4)
►
: Focus Far
(*) Works only when OSD Menu is inactive.
ANALOG OUT0 should be set to TVI MODE, AHD MODE or CVI MODE
to get CVBS video in sub-out. If it is set to CVBS, there is no CVBS video
in sub-out port. (SYSTEM> OUTPUT> ANALOG OUTPUT0)
If CVBS video is enabled through ANALOG OUT0 or Sub-out port, WDR
and 3D-NR functions are disabled in all video outputs.
It should be considered when installer adjusts the video with installation
monitor via CVBS video signal.
