36
Full Menu Setup
3-5. Event
3-5-1. Triggers
EVENT TRIGGERS menu defines and sets the parameters for the various event
sources.
> DWELL : Sets the time for the motion event once detected.
> Mark ENABLE checkbox to create & activate up to 4 motion areas.
> NAME : Input the individual name for each motion detection area.
> SENSITIVITY: Sets the motion detection sensitivity for all areas. Higher values increase
sensitivity
●
Motion
[ Important NOTE ]
Once the event is generated, the camera can record the video into the storage, output
the alarm signal, email the event, send the video clip to FTP, boost the video frame rate,
move to PTZ preset or send the event to the notification server. These post processes
require the settings at SETUP>EVENT>ACTIONS first and then SETUP>EVENT>RULES.
VCA
Tamper
Alarm In
System
Manual
Network
Timer
Day/Night
