Wallbox Adspace - Assembly manual
8 - 2021
Fig. 29: The place of applying the terminating
jumper (variant B)
5.4.
Internet connections via Ethernet in-
terface in LAN network
To provide the Internet connection to a charger
equipped with Enelion Bridge module via Ethernet in-
terface:
1. Insert the Ethernet cable into the device through
the gland for communication cables.
2. Terminate the cable with the RJ45 connector ac-
cording to TIA-568A/B to 100BaseT.
Fig. 30: Termination of the Ethernet cable accord-
ing to TIA-568A/B to 100BaseT.
3. Connect
the
Ethernet
cable
to
the
WAN/INTERNET socket of Enelion Bridge mod-
ule marked with number 2.
Fig. 31: Enelion Bridge module diagram.
5.5.
Backlight power supply
The backlight module is powered from the terminals of
one of the charging controllers. It activates with the ap-
pearance of voltage in the charging controller terminals.
16
Connection
