EN
DURO
®
EM505FL 36
Ref: EM505FLV3-UM-TKI-0120-Rev.A.
INTRODUCTION
Congratulations on choosing the EN
DURO
®
EM505FL caravan manoeuvring system. This has been produced
according to very high standards and has undergone careful quality control procedures.
Simply by using the remote handset you can move your caravan effortlessly into any position required within
operating guidelines. Soft start and soft stop technology allows you to manoeuvre your caravan even more
accurately without any shocks.
The caravan manoeuvring system consists of two 12 Volt motor-power rollers, a 12 Volt control unit and a
remote handset. To function, the motor-powered rollers must be engaged against the tyres of your caravan.
The EN
DURO
®
EM505FL caravan manoeuvring system is provided with an automatic engaging system. By
pushing two buttons on the remote handset, both motor-powered rollers will be simply pressed on the tyre.
Once this is done the manoeuvring system is ready for operation. The remote handset will allow you to move
your caravan in any direction. You can even rotate the caravan on its own axis without moving forwards or
backwards (this function just can work under the “single-axle function”).
By the integrated level display, you can see on the remote handset if the caravan is level.
By means of the integrated Finding Level feature, the caravan can be easily leveled on the axle (level
necessary, not included). If the manoeuvring system is extended with the autoSteady system, then the corner
steadies will also be automatically turned out and the caravan will also be leveled automatically in the
longitudinal direction.
Before proceeding with installation and starting to use the manoeuvring system, please read
this manual very carefully and be aware of all the safety instructions! The owner of the
caravan will always be responsible for correct use. Keep this manual inside your caravan for
future reference.
INTENDED USE
The EN
DURO
®
EM505FL caravan manoeuvring system is suitable for single axle and twin axle caravans.
Suitable for L-profiled and U-profiled chassis.
Suitable for chassis with a chassis thickness between min. 2.5mm and max. 3.5mm.
Depending on the weight of the caravan, the manoeuvring system cannot overcome obstructions that are more
than about 2cm in height without assistance (please use wedges as a ramp).
The standard installation kit only provides parts for installing the caravan manoeuvring system within the
measurements given in Fig. 1.
SPECIFICATIONS
Designation
EN
DURO
®
EM505FL
Operational voltage
12 Volt DC
Average current consumption
40 Ampere
Maximum current consumption
140 Ampere
Transmitting frequency remote handset
868MHz
Internal battery remote handset
3,7V - 1600mAh
Speed
approx. 15cm per sec.
Weight (2 motor set)
approx. 33kg (exclusive battery)
Permissible overall Weight single axle (2 motors)
2000kg (1750kg on 18% gradient)
Permissible overall Weight twin axle (2 motors)
2000kg (1750kg on 18% gradient)
Permissible overall Weight twin axle (4 motors)
3000kg (2350kg on 18% gradient)
Minimum width (caravan/trailer)
1800mm
Maximum width (caravan/trailer)
2500mm
Maximum tyre width
225mm
Power source (battery)
LiFePO
4
: 12V, 20Ah (recommended EN
DURO
®
LI1220)
Lead acid: 12V, 80Ah (min.)