3
Replacing A Charging Pod
The charging pod is made from quality materials and designed to provide
years of service when properly used. In most cases, the charging pod will
only be replaced when you want to use the charger with a different battery.
Follow these steps to change the charging pod:
Obtain a charging pod made specifically for the ENDURA™ NCC0325.
Confirm
that the charging pod is compatible with the battery you want to charge.
Unplug the AC to DC power supply from the ENDURA™ NCC0325.
Turn the locking screw on the bottom of the charging pod counter-clock-
wise several rotations. (The screw remains connected to the charging
pod.) Lift the charging pod from the charging base.
Insert the replacement charging pod into the charging base and secure
with the locking screw. Do not over tighten the screw.
Inspect the charging contacts to ensure they are clean and unobstructed.
Connect the AC to DC power supply to the ENDURA™ NCC0325. You are
now ready to charge a battery compatible with the charging pod.
1.
2.
3.
4.
5.
6.
