PLEASE NOTE:
Low power: The Red LED will blink for eight seconds when battery capacity is lower
than 3.3V and the ENDURA T18 Personal Vaporizer battery will automatically power
off.
When the ENDURA T18 Personal Vaporizer battery is fully charged the LED will light
fully Green.
17
Over-charge Protection:
4.5~6.0V, charging current 420mA.
Overheat Protection:
The red LED will blink 3 times if the PCB is overheated.
‘Vape while charging’ Technology
The ENDURA T18 Personal Vaporizer is recharged with a Micro USB cable. When
plugged into a power source the ENDURA T18 Personal Vaporizer can also be vaped
and charged at the same time with Innokin Technology’s ‘Vape while charging’
pass-through technology.
While Vaping while charging and using the ENDURA T18 the LED will display:
Green
= Almost fully Charged. Battery voltage is higher than 3.75V.
Yellow
= Half Power. Battery voltage is around 3.6V-3.75V
Red
= Low Power. Battery voltage is lower than 3.6V. Charge the ENDURA T18.
16
Technical Specifications
Battery:
1000mAh, 7C continually
Standby current:
10 uA max
Maximum output Wattage:
14W
Maximum output Current:
3.5A
Maximum output Voltage:
5.5V
Clearomizer Resistance:
1.2 ~ 2.5Ohm
Charging:
Micro USB DC5V/1A
