background image

18

Specifications (EC6M / EC6M-V2)

Specifications subject to change without notice.

Dimensions (W x L x H) 
Weight 
Compatible Chemistries
Ambient Operating Temperature 
Power Supply 

(TWC6M-PS)

Charger Input 

A

 

Charge Rate 

B

 

Approvals 

509 x 148 x 91 mm / 20.0 x 5.8 x 3.6 inches
1.4 kg / 3.1 lbs. 

(charger only)

Li-Ion / LiPo / NiMH / NiCd 

(based on pod selected)

5° C - 40° C / 41° F - 104° F
100V – 240V AC / 50 Hz – 60 Hz / 2.0A
12V-24V DC / 5.4A

 (minimum)

900 mA (10.6V-13.5V)
FCC

C

 / BC

D

 / DOE

/

 

CE

(A) Applies to EC6M. Charger input for EC6M-V2 is 4.8A (minimum). (B) Applies to EC6M. Charge rate for 

EC6M-V2 is 700 mA. (C) Complies with FCC Rules, Part 15, Subpart B, Class B 2016, ANSI C63.4:2014. (D) 

Complies with CaliforniaEnergy Commission CEC-400-2011-005. (E) Complies with U.S. Department of Energy 

10 CFR, Part 430, PC3 and 4. This device complies with Part 15 of the FCC Rules. Operation is subject to the 

following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept 

any interferencereceived, including interference that may cause undesired operation.

Summary of Contents for EC6M

























Reviews: