EndRun TDC3303, User Manual

Page: 11 / 44

T D C 3 3 0 3 U s e r M a n u a l 1
"Smarter Timing Solutions"
Chapter
One
Introduction
The TDC3303 Time Code Distribution Chassis is a 19” rack-mounted, dual-input, ten-output device
for high-performance analog timecode signal distribution with intelligent input fault detection and
failover switching. In addition to reproducing the input signal with very low distortion and propaga-
tion delay, the unit features excellent input-to-input and output-to-output isolation. Status is locally
observable on a cleanly designed front panel with LED indicators, and it is fully manageable via
RS-232 or an optional ethernet port. Redundant AC, DC or AC/DC power inputs are optionally
available.
Visit http://www.endruntechnologies.com/support.htm to download firmware upgrades and get the
latest manuals and other documentation.
Main Features
Overview
The TDC3303 may be employed either as a simple, single-input, ten-output signal distributor for non-
critical applications, or, by making use of its intelligent dual-input failover switching and redundant
power supply capabilities, high-availability signal distribution systems for top tier commercial and
military applications may be efficiently implemented. The unit will accept a TTL or open-collector
alarm output signal from the upstream signal source on each of its two external alarm inputs so that
bank switching of multiple TDC3303 units may be efficiently and synchronously implemented.
Performance, Reliability and Economy
It provides high performance and reliability combined with low cost. Its internal sub-assemblies are
fabricated with state-of-the-art components and processes and are integrated in a solid, high-quality
chassis.
Flexibility
It supports full user configuration of the input switching strategy and complete remote monitoring
and control via multiple industry-standard interfaces.
Easy Installation
Its standard 1U high, 19” rack-mountable chassis makes installation simple. It may be mounted in
any convenient location. All signal input and output connectors are standard BNC female connec-
tors. AC power input is via IEC-320 standard power cord. Connect it to your host computer using
the standard RS-232 serial cable provided, or on ethernet equipped units, use the rear panel mounted
10/100Base-T RJ-45 connector and CAT-5 patch cable provided to connect it to your network. Initial
network configuration is automatic on networks using the Dynamic Host Configuration Protocol
(DHCP). Manual network configuration is via the RS-232 serial I/O port.