Status at:
February 2013
ESE 807 / 1107 / 1307 / 1407 DBG (ES) DIN
63
Perform all work in the maintenance plan according to the
information in the engine's operating and maintenance man-
ual
(Fig. 3-5-(2))
. These operating and maintenance instruc-
tions of the engine manufacturer are an integral component
of these operating instructions.
6.2.1
Motor oil
WARNING!
Leaking engine oil can contaminate soil and groundwa-
ter.
Use an oil collection container.
Recycle used motor oil
WARNING!
Engine oil can be hot
— risk of burns.
Allow motor to cool
The following requirements must be met:
The engine should ideally be slightly warm (allow a cold
engine to run for 5 min., then stop it and allow it to cool
for 2 min.).
Fig. 6-1: Oil dipstick
Check the oil level as follows:
1.
Pull out the dipstick
(Fig. 6-1-(2))
and wipe it off with a
clean cloth.
Requirements
Checking the oil
Summary of Contents for ESE 1107 DBG DIN
