Endress+Hauser Waterpilot FMX21, Operating Instructions Manual

Page: 80 / 144

Overview of the operating menu Waterpilot FMX21
80 Hauser
13 Overview of the operating menu
Depending on the parameter configuration, not all submenus and parameters are
available. Information on this can be found in the parameter description under
"Prerequisite".
Setup Description
Operating mode →  91
Press. eng. unit →  93
Corrected press. →  95
Pos. zero adjust (relative pressure sensor) →  92
Calib. offset (absolute pressure sensor) →  92
Empty calib. ("Level" measuring mode and "Calibration mode" = wet) →  97
Full calib. ("Level" measuring mode and "Calibration mode" = wet") →  98
Set LRV ("Pressure" measuring mode) →  94
Set URV ("Pressure" measuring mode) →  94
Damping →  92
Level before Lin ("Level" measuring mode) →  100
Pressure af.damp →  95
Setup → Extended setup Description
Code definition →  88
Device tag →  89
Operator code →  88
Setup → Extended setup → Level
("Level" measuring mode) Description
Level selection →  96
Output unit →  96
Height unit →  96
Calibration mode →  97
Empty calib. →  97
Empty pressure →  97
Empty height →  98
Full calib. →  98
Full pressure →  98
Full height →  99
Adjust density →  99
Process density →  99
Level before lin →  100
Setup → Extended setup → Linearization Description
Lin. mode →  101
Unit after lin. →  101
Line-numb: →  101