Endress+Hauser Topclean S CPC30, Operating Instructions Manual

Page: 141 / 178

Topclean S 8 Troubleshooting
Hauser 141
8.8 Replacing the device fuses
#
Warning!
Danger to personnel.
Before replacing the fuse, make sure the device is voltage-free.
Fuse CPM153:
• Position of the fuse holder: "A" in fig. 49.
• Use only a 5 x 20 mm fine-wire fuse with 3.15 A, medium slow-blow. All other fuses are not
permitted.
Fuse CPG30
• Position of the fuse holder: "A" in fig. 52.
• Use only a 5 x 20 mm fine-wire fuse with 3.15 A, medium slow-blow. All other fuses are not
permitted.
8.9 Disposal
The Mycom S CPM153 transmitter contains electronic components and PCBs and therefore must
be disposed of as electronic refuse. Please keep to the local regulations.
Apart from the mechanical components, the CPG30 also contains electronic components. For
disposal purposes, separate the device into electronics, plastic (housing) and metal rubbish.
The assembly may be contaminated by the medium. Therefore, when disposing of it, the plant
disposal or safety officer must be consulted.
710 Wear part set, water valve 24 V DC 50086191
720 Wear part set, internal check valve Valve body, ball, seals 50086192
730 Pressure hose nozzle D 16 G ¾ for
motive water 50072990
740 Pressure hose nozzle D 12 G ¼ for
cleaner 50072991
Pos.
no. Kit name Content / use Order
number