Commissioning
Teqwave T
32
Hauser
Creating and editing a device configuration
If a measuring device is not connected, the measurement point organization cannot be
edited and the Edit button is disabled.
1. Click the Plus button to create a new configuration.
A new configuration with a system-assigned name appears in the list.
2. Double-click the configuration name to change the name.
The new configuration is automatically sorted alphabetically in the list.
3. Click the Edit button to create a new measurement point organization or to edit an exis-
ting one.
The "Organize measurement points" window appears.
4. Edit the measurement points in the "Organize measurement points" window
5. Set the device language in the "Language" selection field.
6. Click "Save" to save the configuration settings or click the Plus button to create additional
configurations.
The window closes when you click "Save".
The operating tool saves the new device configurations in the specified "Device con-
figurations" working directory
Transferring the device configuration to the measuring device
1. Click the name of the configuration to select the device configuration.
2. Click the Transfer button to save the device configuration in the measuring device.
The operating tool transfers the device configuration to the measuring device and
overwrites the old device configuration.
The measuring device is disconnected from the operating tool and computer.
3. Reconnect the measuring device with the operating tool to make the changes visible in
the operating tool. Reconnect the USB cable to the computer for this purpose.
Summary of Contents for Teqwave T
Page 54: ...www addresses endress com ...
