Endress+Hauser Teqwave T, Operating Instructions Manual

Page: 29 / 54

Teqwave T Commissioning
Hauser 29
Function buttons
Opening the "Organize measurement points" window
Prerequisite
• The measuring device is connected to the operating tool.
‣
Select the menu "Device con fi guration" → "Measurement point" → "Organize".
 The "Organize measurement points" window appears.
Adding a measurement point to the measuring device
‣
Drag the measurement point or measurement point group from the left-hand window
"Measurement points: working directory" and drop it into the right-hand window "Mea-
surement points: device" at the desired position.
Adding a measurement point group or subgroup to the measuring device
A maximum of one subgroup is permitted per measurement point group.
1. Click the Add button to add a new measurement point group or subgroup. Select the
measurement point group beforehand in order to create a subgroup.
 The measurement point group or subgroup appears at the top.
2. Assign a name to the measurement point group or subgroup.
The name may only occur once in a level. A maximum of 30 characters are permit-
ted.
 The operating tool sorts the measurement point groups and subgroups in alphabeti-
cal order.
Deleting a measurement point or measurement point group from the measuring
device
‣
Click the Delete button to delete a previously selected measurement point or measure-
ment point group from the measuring device.
Transferring new measurement point organization to the measuring device
1. Click the "Apply" button to save the new measurement point organization in the measu-
ring device.
 The operating tool transfers the new measurement point organization to the measu-
ring device and overwrites the old organization.
 The measuring device is disconnected from the operating tool and computer.
2. Reconnect the measuring device with the operating tool to make the changes visible in
the operating tool. Reconnect the USB cable to the computer for this purpose.
Button Description
Delete the measurement point
Delete the selected measurement point or measurement point group from the measuring
device.
Create the measurement point group
Create a new measurement point group or subgroup.
Create a measurement point
Open the "Create measurement point" window. Create a new measurement point →  27.