Endress+Hauser Teqwave T, Operating Instructions Manual

Page: 15 / 54

Teqwave T Operating options
Hauser 15
7 Operating options
7.1 Overview of the operating options
The measuring device can be operated and configured in the following ways:
• Operation via the local display (mobile transmitter)
• Measured data configured and read out via the "Teqwave Mobile Viewer" operating tool
supplied
7.2 Access to the measuring device via the local display
The measurement procedure is started via the local display. The measuring device is confi-
gured and the measured values of the measuring device are read out using the operating tool
supplied.
7.2.1 Measurement point selection (startup screen)
After starting the measuring device, the screen appears where you can select the measure-
ment point. Use the back/repeat key on the membrane keypad to return to the measurement
point selection. Measurement points can be organized into groups and subgroups.
A0035639-EN
Fig. 3: Example: measurement point selection (startup screen)
1 Measurement point selection and measurement display area →  16
2 RFID signal indicator for automatic measurement point detection (RFID is currently not available)
3 Battery charge status
4 Access settings for date and time →  25
5 Clock
6 Scroll function
7 Measurement point group/subgroup
8 Measurement point
9 Information/instructions
Scroll function
The scroll function appears as of six groups or six measurement points.
Measurement point group/subgroup
Organizing measurement points into groups gives users a better overview and allows users
to find the measurement points they need more quickly. Measurement points can be orga-
nized into groups using the operating tool.
2
4
5
6
3
1
7
8
9