Teqwave H
Basic safety instructions
Hauser
9
2
Basic safety instructions
2.1
Requirements for the personnel
The personnel for installation, commissioning, diagnostics and maintenance must fulfill
the following requirements:
‣
Trained, qualified specialists must have a relevant qualification for this specific function
and task.
‣
Are authorized by the plant owner/operator.
‣
Are familiar with federal/national regulations.
‣
Before starting work, read and understand the instructions in the manual and
supplementary documentation as well as the certificates (depending on the
application).
‣
Follow instructions and comply with basic conditions.
The operating personnel must fulfill the following requirements:
‣
Are instructed and authorized according to the requirements of the task by the facility's
owner-operator.
‣
Follow the instructions in this manual.
2.2
Designated use
2.2.1
Application and media
Only use the measuring device described in these Operating Instructions for the
measurement of liquids and liquid analysis.
Only operate the measuring device within the limits specified in the technical data and for
the specific concentration app.
To ensure that the measuring device remains in proper condition for the operation time:
‣
Only use the measuring device for media to which the process-wetted materials are
sufficiently resistant.
2.2.2
Incorrect use
Non-designated use can compromise safety. The manufacturer is not liable for damage
caused by improper or non-designated use.
2.2.3
Residual risks
L
WARNING
Hot media can present a burn hazard.
‣
In the event of elevated medium temperatures, ensure protection against contact to
prevent burns.
2.3
Workplace safety
For work on and with the device:
‣
Wear the required personal protective equipment according to federal/national
regulations.
For welding work on the piping:
‣
Do not ground the welding unit via the measuring device.
