Endress+Hauser SpectraSensors SS2100r, Hardware Manual

Page: 56 / 60

SS2100r H
2
S Analyzer
B
–
12 4900002189 rev. D 3-7-18
For SpectraSensors Tech Support inside the USA:
Phone : 888-Endress
E-mail : techsupport@us.endress.com
Hours : Service engineers are on duty Monday-Friday, 8:00 a.m. to 5:00 p.m.
Central Time.
For SpectraSensors Tech Support outside the USA:
Phone : +1 (713) 466-3172
E-mail : techsupport@spectrasensors.com
Service Repair Order
If returning the unit is required, obtain a
Service Repair Order
( SRO ) Number
from Customer Service before returning the analyzer to the factory. Your
service representative can determine whether the analyzer can be serviced on
site or should be returned to the factory. All returns should be shipped to:
11027 Arrow Rte.
Rancho Cucamonga, CA 91730-4866
United States of America
1-909-948-4100
Packing
SpectraSensors analyzer systems and auxiliary equipment are shipped from
the factory in appropriate packaging. Depending on the size and weight, the
packaging may consist of a cardboard-skinned container or a wooden crate. All
inlets and vents are capped and protected when packaged for shipment.
If the equipment is to be shipped or stored for any length of time, it should be
packed in the original packaging when shipped from the factory. If the analyzer
has been installed and/or operated (even for purposes of a demonstration), the
system should first be decontaminated (purged with an inert gas) before
powering down the analyzer.
To prepare the analyzer for shipment or storage:
1. Shut off the process gas flow.
2. Allow all residual gas to dissipate from the lines.
3. Connect a purge supply, regulated to the specified sample supply
pressure, to the sample supply port.
Process samples may contain hazardous material in potentially
flammable and/or toxic concentrations. Personnel should have a
thorough knowledge and understanding of the physical properties
of the sample and prescribed safety precautions before installing,
operating or maintaining the analyzer.