Solitrend MMP42
Installation
Hauser
13
5.4
Protection of sensor connector against abrasion
If sand and gravel can come into contact with the sensor connector when they flow over the
baffle plate, it is recommended to mount an additional protective guard on the sensor
connector.
1. The heat-shrink tube supplied with the cable can be used to provide this protection.
A0037427
6
Example of round sensor
2. Once the sensor has been installed and the sensor cable connected, the heat-shrink tube
can be shrunk onto the connector and cable with a hot air blower
A0037428
7
Example of round sensor
Summary of Contents for Solitrend MMP42
Page 27: ......
