Smart System for Aquacultures SSP200B
Incoming acceptance and product identification
Hauser
11
4
Incoming acceptance and product
identification
4.1
Incoming acceptance
• Check the packaging for visible damage arising from transportation.
• To avoid damage, remove the packaging with care.
• Keep all the accompanying documents.
The system may not be put into operation if the contents are found to be damaged
beforehand. Contact your Hauser Sales Center if this happens. Return the system
to Hauser in the original packaging where possible.
4.2
Product identification
The nameplate of your Smart System can be found in the "Nameplate" section of these
Operating Instructions. The nameplate is also located on the inside of the cover of the
Edge Device.
The nameplate contains the following information:
• Serial number of the Smart System
• Serial number of the Liquiline CM444 transmitter
• Serial numbers of the sensors
• Discount code for registering the installation in Netilion Cloud
11111105G00
12345678
11111105O00
11111105I10
Assembled in Switzerland
CH-4153 Reinach
Discount Code:
Hauser
Extended order code:
R1000224820
Order code:
Process Solutions AG
Serial No. ISEmax CAS40D:
Serial No. Liquiline CM444:
Serial No. Oxymax COS61D:
Serial number:
Smart System Package SSP200B
SSP200-10C2/0
SSP200B-AAFB11A
Year of manufacturing: 2020
A0042895
2
Example of nameplate for SSP200B
You can identify the system in the following ways:
• Enter the serial number indicated on the nameplate in W@M Device Viewer
(www.endress.com → About us → W@M Life Cycle Management → Operations → The
right device information always at hand (find spare part) → Access device-specific
information → Enter serial number): all the information relating to the system/device is
then displayed.
• Enter the serial number indicated on the nameplate in the
Hauser Operations App: all the information relating to the system is then
displayed.
