Endress+Hauser Prosonic Flow 90, Operating Instructions Manual

Page: 93 / 114

Proline Prosonic Flow 90 9 Trouble-shooting
Hauser 93
9.10 Software history
!
Note!
Usually, an upload or download between the different software versions is only possible with a
special service software.
Date Software version Changes to software Operating
Instructions
11.2004 2.00.XX Software expansion:
– Prosonic Flow P sensor
– Language group
(contains the language Chinese and English)
New functionalities:
– DEVICE SOFTWARE
→
Device software
displayed (NAMUR-recommendation 53)
– REMOVE SW OPTION
→
Remove F-CHIP
options
50099981/11.04
10.2003 Amplifier:
1.06.XX
Communication module:
1.03.XX Software expansion:
– Language groups
– Flow direction pulse output selectable
New functionalities:
– Operation hours counter
– Adjustable backlight
– Simulation function for pulse output
– Access code counter
– Reset function fault history
– Up-/download with Fieldtool in preparation
50099981/10.03
12.2002 Amplifier:
1.05.00 Software expansion:
– Prosonic Flow P sensor 50099981/12.02
07.2002 Amplifier:
1.04.00
Communication module:
1.02.01 Software expansion:
– Device functions: New definition of search
range “sound velocity liquid”
– New error messages:
PIPE DATA
INTERFERENCE
– Minimum sensor dicstance 180 mm
for W sensor
– Function CURRENT SPAN:
additional options
50099981/07.02
06.2001 Amplifier:
1.00.00
Communication module:
1.02.00 Original software.
Compatible with:
– Fieldtool
– HART communicator DXR 275
(OS 4.6) and higher) with rev. 1, DD 1
50099981/06.01