Endress+Hauser Prosonic Flow 90, Operating Instructions Manual

Page: 75 / 114

Proline Prosonic Flow 90 8 Accessories
Hauser 75
8 Accessories
Various accessories, which can be ordered separately from Hauser, are available for the
transmitter and the sensor. The Hauser service organisation can provide detailed informa-
tion on the order codes of your choice.
Accessory Description Order Code
Transmitter wall-mount
housing Prosonic Flow 90 Transmitter for replacement or for stock. Use the order
code to define the following specifications:
– Approvals
– Degree of protection / version
– Cable entries
– Display / power supply / operation
– Software
– Outputs / inputs 90XXX
−
XXXXX ********
Mounting set for
transmitter Mounting set for wall-mount housing.
Suitable for:
– Wall mounting
– Pipe mounting
– Panel mounting
Mounting set for alum. field housing
Suitable for pipe mounting (3/4"...3")
DK9WM
−
A
DK9WM
−
B
Flowmeter sensor W Clamp-on Sensor:
–
20...+80 °C; DN 100...4000; IP67
–
20...+80 °C; DN 50...300; IP67
–
20...+80 °C; DN 100...4000; IP68
–
20...+80 °C; DN 50...300; IP68
Installation sensor
–
40...+80 °C; DN 200...4000; IP68
DK9WS
−
A*
DK9WS
−
B*
DK9WS
−
M*
DK9WS
−
N*
DK9WF
−
K*
Flowmeter sensor P Clamp-on Sensor:
–
40...+80 °C; DN 100...4000
–
40...+80 °C; DN 50...300
Clamp-on Sensor:
0...+170 °C; DN 100...4000
0...+170 °C; DN 50...300
DK9PS
−
A*
DK9PS
−
B*
DK9PS
−
E*
DK9PS
−
F*
Flowmeter sensor U Clamp-on Sensor:
–
20...+80 °C; DN 15...100 DK9UF
−
A
Sensor holder set for
Prosonic Flow W/P sensors – Sensor holder, fixed retaining nut, clamp-on
version
– Sensor holder, removable retaining nut,
clamp-on version
– Sensor holder, welding type, DN 200...300,
Insertion version, single channel
– Sensor holder, welding type, DN 300...400,
Insertion version, single channel
– Sensor holder, welding type, DN 400...4000,
Insertion version, single channel
– Sensor holder, welding type, DN 400...4000,
Insertion version, two channel
DK9SH
−
A
DK9SH
−
B
DK9SH
−
C
DK9SH
−
D
DK9SH
−
E
DK9SH
−
F