Endress+Hauser Prosonic Flow 90, Operating Instructions Manual

Page: 49 / 114

Proline Prosonic Flow 90 5 Operation
Hauser 49
5.5.1 Operating options
For the complete operation of the measuring device, including device-specific commands, there are
DD files available to the user to provide the following operating aids and programs:
!
Note!
In the CURRENT RANGE function (current output 1), the HART protocol demands the setting
“4...20 mA HART” or “4-20 mA (25 mA) HART”.
• HART write protection can be disabled or enabled by means of a jumper on the I/O board.
HART handheld terminal DXR 375
Selecting device functions with a HART Communicator is a process involving a number of menu
levels and a special HART function matrix.
The HART manual in the carrying case of the HART Communicator contains more detailed infor-
mation on the device.
Operating program “ToF Tool - Fieldtool Package”
Modular software package consisting of the service program “ToF Tool” for configuration and
diagnosis of ToF level measuring devices (time-of-flight measurement) and evolution of pressure
measuring instruments as well as the “ToF Tool - Fieldtool Package” service program for the con-
figuration and diagnosis of Proline flowmeters. The Proline flowmeters are accessed via a service
interface or via the service interface FXA 193 or the HART protocol.
Contents of the “ToF Tool - Fieldtool Package”:
• Commissioning, maintenance analysis
• Configuring flowmeters
• Service functions
• Visualisation of process data
• Trouble-shooting
• Controlling the “Fieldcheck” tester/simulator
Fieldcare
FieldCare is Hauser’s FDT-based plant asset management tool and allows the configuration
and diagnosis of intelligent field devices. By using status information, you also have a simple but
effective tool for monitoring devices. The Proline flowmeters are accessed via a service interface or
via the service interface FXA 193.
Operating program “SIMATIC PDM” (Siemens)
SIMATIC PDM is a standardised, manufacturer-independent tool for the operation, configuration,
maintenance and diagnosis of intelligent field devices.
Operating program “AMS” (Emerson Process Management)
AMS (Asset Management Solutions): program for operating and configuring devices