EA01097D
Hauser
11
4 →
5 →
T20
1.
2.
PUSH
TO
REMOVE
6 →
7 →
8 →
3 mm
0.6 Nm
(0.4 lbf ft)
T20
1.5 Nm
(1.1 lbf ft)
‣
1. This step must only be
performed if a connection board
is present.
‣
1. This step must only be
performed if a connection board
is present.
9 →
10
-
+
E
T20
1.
2.
For detailed information on the electrical connection, see the "Electrical connection"
section of the Operating Instructions for the device.
For detailed information on commissioning, see the "Commissioning" section of the
Operating Instructions for the device.
