Proline Promass Q 300
76
Hauser
Data logging
Manual
If the
Extended HistoROM
application package (order option) is enabled:
• Record up to 1
000 measured values via 1 to 4 channels
• User configurable recording interval
• Record up to 250 measured values via each of the 4 memory channels
• Export the measured value log via a variety of interfaces and operating tools e.g. FieldCare,
DeviceCare or Web server
• Use the recorded measured value data in the integrated device simulation function in the
Diagnostics
submenu.
Service logbook
Manual
• Create up to 20 user-specific events with a date and customized text in a separate logbook for
documentation of the measuring point
• Use for calibration or service operations, for example, or for maintenance or revision work that has
been performed
Certificates and approvals
CE mark
The measuring system is in conformity with the statutory requirements of the applicable EU
Directives. These are listed in the corresponding EU Declaration of Conformity along with the
standards applied.
Hauser confirms successful testing of the device by affixing to it the CE mark.
C-Tick symbol
The measuring system meets the EMC requirements of the "Australian Communications and Media
Authority (ACMA)".
Ex approval
The measuring device is certified for use in hazardous areas and the relevant safety instructions are
provided in the separate "Safety Instructions" (XA) document. Reference is made to this document on
the nameplate.
The separate Ex documentation (XA) containing all the relevant explosion protection data is
available from your Hauser sales center.
ATEX/IECEx
Currently, the following versions for use in hazardous areas are available:
Ex db eb
Category
Type of protection
II1/2G
Ex db eb ia IIC T6…T1 Ga/Gb
Ex db eb ia IIB T6…T1 Ga/Gb
II2G
Ex db eb ia IIC T6…T1 Gb
Ex db eb ia IIB T6…T1 Gb
Ex db
Category
Type of protection
II1/2G
Ex db ia IIC T6…T1 Ga/Gb
Ex db ia IIB T6…T1 Ga/Gb
II2G
Ex db ia IIC T6…T1 Gb
Ex db ia IIB T6…T1 Gb
