Endress+Hauser Proline Promass O 100HART, Operating Instructions Manual

Page: 14 / 140

Incoming acceptance and product identification Proline Promass O 100 HART
14 Hauser
4.2.2 Sensor nameplate
Ext. ord. cd.:
Order code:
Ser. no.:
Material:
Tm:
Size:
Ta:
Date:
6
10
11
1 2
3
4
5
Ptest:
7
8
12
Patents
16
17
19
18
13
15
9
14
A0017923
 3 Example of a sensor nameplate
1 Name of the sensor
2 Manufacturing location
3 Order code
4 Serial number (Ser. no.)
5 Extended order code (Ext. ord. cd.)
6 Flange nominal diameter/nominal pressure
7 Test pressure of the sensor
8 Nominal diameter of sensor
9 Sensor-specific data: e.g. pressure range of secondary containment, wide-range density specification (special
density calibration)
10 Material of measuring tube and manifold
11 Fluid temperature range
12 Degree of protection
13 Approval information for explosion protection and Pressure Equipment Directive
14 Permitted ambient temperature (T
a
)
15 Document number of safety-related supplementary documentation (→  112)
16 CE mark, C-Tick
17 Flow direction
18 Manufacturing date: year-month
19 2-D matrix code
Order code
The measuring device is reordered using the order code.
Extended order code
• The device type (product root) and basic specifications (mandatory features) are
always listed.
• Of the optional specifications (optional features), only the safety and approval-
related specifications are listed (e.g. LA). If other optional specifications are also
ordered, these are indicated collectively using the # placeholder symbol (e.g. #LA#).
• If the ordered optional specifications do not include any safety and approval-related
specifications, they are indicated by the + placeholder symbol (e.g. XXXXXX-ABCDE
+).