Operation
Proline Promass F 200 HART
94
Hauser
If the length of the logging interval or the assignment of the process variables to the channels
is changed, the content of the data logging is deleted.
"Data logging" submenu
Data logging
®
Assign channel 1
Assign channel 2
Assign channel 3
Assign channel 4
Logging interval
Clear logging data
Display channel 1
Display channel 2
Display channel 3
Display channel 4
Parameter overview with brief description
Parameters
Prerequisite
Description
Selection/
User entry
Factory setting
Assign channel 1-4
-
Assign process
variable to logging
channel.
• Off
• Mass flow
• Volume flow
• Corrected
volume flow
• Density
• Reference density
• Temperature
• Electronics
temperature
• Vibration
frequency
• Oscillation
amplitude
• Oscillation
damping
• Signal asymmetry
• Current output 1
• Current output 2
Off
Logging interval
-
Define the logging
interval t
log
for data
logging. This value
defines the time
interval between the
individual data
points in the
memory.
1.0 to 3
600.0 s
10.0 s
Clear logging data
-
Clear the entire
logging data.
• Cancel
• Clear data
Cancel
