Commissioning
Proline Promass F 200 HART
64
Hauser
Temperature unit
Select the unit for
temperature.
Result
The selected unit applies for:
– Outputs
– Reference temperature
– Simulation process
variable
Unit choose list
Country-dependent:
•
°
C (Celsius)
•
°
F (Fahrenheit)
Minimum frequency value
Enter the minimum
frequency value.
0.0 to 1
000.0
0.0 Hz
Maximum frequency value
Enter the maximum
frequency value.
0 to 1
000 Hz
10
000.0 Hz
Measuring value at
minimum frequency
Enter the measured value at
the minimum frequency.
Depends on the process
variable selected
-
Measuring value at
maximum frequency
Specify the measured value at
maximum frequency.
Depends on the process
variable selected
-
Failure mode
Specify the output behavior
in the event of a device
alarm.
• Actual value
• Defined value
• 0 Hz
0 Hz
Failure frequency
Enter the value for the
frequency output in the
event of a device alarm.
0.0 to 1
250.0 Hz
0.0 Hz
Invert output signal
Invert the output signal.
• No
• Yes
No
Sequence of the wizard for the switch output
End of wizard
Operating
mode
Switch
Switch
out funct
Diag.
behavior
Off
On
Assign
diag. beh
Alarm
Alarm or
warning
Warning
Invert outp.sig.
A0017439-EN
å
16
"Pulse/frequency/switch output " wizard in the "Setup" menu: "Switch" operating mode (Part 1)
