Endress+Hauser Proline Promass F 100, Operating Instructions Manual

Page: 71 / 122

Proline Promass F 100 Modbus RS485 Operation
71
Navigation
"Diagnostics" menu → Measured values → Measured variables
‣
Measured variables
Mass flow →  71
Volume flow →  71
Corrected volume flow
→  71
Density →  71
Reference density →  72
Temperature
→  72
Pressure value →  72
Concentration →  72
Target mass flow →  72
Carrier mass flow →  72
Parameter overview with brief description
Parameter Prerequisite Description User interface
Mass flow – Displays the mass flow currently
measured.
Dependency
The unit is taken from the Mass flow
unit parameter (→  54).
Signed floating-point
number
Volume flow – Displays the volume flow currently
calculated.
Dependency
The unit is taken from the Volume flow
unit parameter (→  54).
Signed floating-point
number
Corrected volume flow – Displays the corrected volume flow
currently calculated.
Dependency
The unit is taken from the Corrected
volume flow unit parameter
(→  54).
Signed floating-point
number
Density – Shows the density currently measured.
Dependency
The unit is taken from the Density unit
parameter (→  54).
Signed floating-point
number