Endress+Hauser Proline Promag W 400 HART, Operating Instructions Manual

Page: 95 / 198

Proline Promag W 400 HART Commissioning
Hauser 95
10.4.6 Configuring the local display
The Display wizard guides you systematically through all the parameters that can
configured for configuring the local display.
Navigation
"Setup" menu → Display
‣
Display
Format display
→  95
Value 1 display →  95
0% bargraph value 1 →  95
100% bargraph value 1 →  96
Value 2 display →  96
Value 3 display →  96
0% bargraph value 3 →  96
100% bargraph value 3
→  96
Value 4 display →  96
Parameter overview with brief description
Parameter Prerequisite Description Selection / User
entry
Factory setting
Format display A local display is provided. Select how measured values
are shown on the display. • 1 value, max. size
• 1 ba 1
value
• 2 values
• 1 value large + 2
values
• 4 values
1 value, max. size
Value 1 display A local display is provided. Select the measured value that
is shown on the local display. • Volume flow
• Mass flow
• Corrected volume
flow
• Flow velocity
• Conductivity
• Corrected
conductivity
• Electronic
temperature
• Totalizer 1
• Totalizer 2
• Totalizer 3
• Current output 1
*
Volume flow
0% bargraph value 1 A local display is provided. Enter 0% value for bar graph
display. Signed floating-point
number Country-specific:
• 0 l/h
• 0 gal/min (us)