Proline Promag 55 PROFIBUS PA
Accessories
Hauser
99
8
Accessories
Various accessories, which can be ordered separately from Hauser, are available for the
transmitter and the sensor. The Hauser service organization can provide detailed
information on the order codes of your choice.
8.1
Device-specific accessories
8.2
Measuring principle-specific accessories
Accessory
Description
Order code
Promag 55 Transmitter
Transmitter for replacement or for stock. Use the order
code to define the following specifications:
– Approvals
– Degree of protection / version
– Cable type for the remote version
– Cable entries
– Display / power supply / operation
– Software
– Outputs / inputs
55XXX – XXXXX * * * * * * * *
Accessory
Description
Order code
Mounting kit for
Promag 55 transmitter
Mounting kit for wall-mounted housing (remote version).
Suitable for:
• Wall mounting
• Pipe mounting
• Panel mounting
Mounting set for aluminum housings. Suitable for:
• Pipe mounting
DK5WM – *
Cable for
remote version
Coil and signal cables, various lengths. Reinforced cable
on request.
DK5CA - * *
Ground cable for
Promag S
A set consists of two ground cables.
DK5GC – * * *
Ground disk /liner
protection plate for
Promag S
Metal disk for potential equalization and/or for protecting
liner of measuring tube lining.
DK5GD – * * * * *
