Proline Promag 55 PROFIBUS PA
Troubleshooting
Hauser
111
9.5
Spare parts
You will find detailed troubleshooting instructions in the preceding sections
The measuring device, moreover, provides additional support in the form of continuous self-
diagnosis and error messages.
Fault rectification can entail replacing defective components with tested spare parts. The illustration
below shows the available scope of spare parts.
!
Note!
You can order spare parts directly from your Hauser service organization by providing the
serial number printed on the transmitter nameplate.
Spare parts are shipped as sets comprising the following parts:
• Spare part
• Additional parts, small items (screws etc.)
• Mounting instructions
• Packaging
a0006181
Fig. 56:
Spare parts for Promag transmitter (field and wall-mount housing)
1
Power unit board (20 to 260 V AC, 20 to 64 V DC)
2
Amplifier board
3
I/O board (PROFIBUS PA type)
4
S-DAT (sensor data storage device)
5
T-DAT (transmitter data storage device)
6
Display module
7
Fieldbus connector consisting of protection cap, connector adapter PG 13.5 / M 20.5
(Order No. 50098037)
8
F-Chip
1
3
6
7
2
4
5
8
