![Endress+Hauser Proline Promag 300 Description Of Device Parameters Download Page 116](http://html1.mh-extra.com/html/endress-hauser/proline-promag-300/proline-promag-300_description-of-device-parameters_2407508116.webp)
Description of device parameters
Proline Promag 300 Modbus RS485
116
Hauser
Failure mode
Navigation
Expert → Output → Curr.output 1 to n → Failure mode (0364–1 to n)
Prerequisite
One of the following options is selected in the
Assign curr.
• Volume flow
• Mass flow
• Correct.vol.flow
• Flow velocity
• Conductivity
• CorrConductivity
• Temperature
• Electronic temp.
One of the following options is selected in the
Current span
• 4...20 mA NAMUR
• 4...20 mA US
• 4...20 mA
• 0...20 mA
Description
Use this function to select the value of the current output in the event of a device alarm.
Selection
• Min.
• Max.
• Last valid value
• Actual value
• Defined value
Factory setting
Max.
*
Visibility depends on order options or device settings
Summary of Contents for Proline Promag 300
Page 2: ......
Page 270: ...Index Proline Promag 300 Modbus RS485 270 Endress Hauser Z Zero point Parameter 96 ...
Page 271: ......
Page 272: ...www addresses endress com ...